|
 
Daetwyler Clean Energy High-Top™ Rooftop Mounting Structures are designed to be either secured (fixed) systems which are hardware mounted to a commercial roof, or as a ballasted rooftop system (nonpenetrating) which is secured using concrete blocks. Our solar rooftop mounting system can be applied to a variety of rooftop configurations. The rooftop system's modular design makes installation easy. All vertical mounting components are pre-assembled which enables the installers to simply place the mounting feet or ballast pans and vertical components in the desired areas, and connect the horizontal piping with built in set screws.
Key Features
 0°-25° tilt angle
Optimal weight distribution - max 11 feet pan/foot placement
Wavy roof adjustment
Completely connected structure for greater wind loads and maximum structural integrity
Specifications
Avg. Dead Weight Load: 3.4 – 4.5 psf Positively Tied
4.8 – 12 psf Ballasted*
Typical Ballast Size: Standard Cap Blocks
(4" X 8" X 16" weighing 32 lbs)
Maximum Ballast Span:11 feet
Vertical Adjustment:4" (for wavy roofs)
Installation Rate: >2.3 kW per man hour
Tilt Angles: 5, 10, 20 and 25 Degree
Panel Orientation: Portrait or Landscape
Panel Compatibility: All Major Brands
Click Here for a copy of our Rooftop Mount Specification Flyer.
Click Here for a copy of our Systems Advantages Brochure.
|
